Telit Wireless Solutions LE910C series - AT#SSLSECCFG - Configure Security Parameters of a SSL Socket

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1428 of 1904 2022-03-04
Not Subject to NDA
3.21.2. AT#SSLSECCFG - Configure Security Parameters of a SSL Socket
Configure security parameters of a SSL socket
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLSECCFG=<SSId>, <CipherSuite>, <auth_mode> [,<cert_format>]
This command allows configuring SSL connection parameters.
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
Until now only one SSL socket is available
<CipherSuite>
integer
0
cipher suite,
In case of LE910C1-EUX/LE910C1-
SAX/LE910C1-SVX/LE910Cx-WWX,
refer to NOTE for supported
CipherSuite.
Values:
0
:
cipher suite is chosen by remote server
1
:
TLS_RSA_WITH_3DES_EDE_CBC_SHA
2
:
TLS_RSA_WITH_AES_128_CBC_SHA
3
:
TLS_RSA_WITH_AES_128_CBC_SHA256
4
:
TLS_RSA_WITH_AES_256_CBC_SHA
5
:
TLS_RSA_WITH_AES_256_CBC_SHA256
6
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA