Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1886 of 1904 2022-03-04
Not Subject to NDA
3.35.28. AT#BCCCD - BLE Client Character Configuration
This command is used for BLE Client Character Configuration.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BCCCD=<Connection Handle>,<Characteristic Handle>,<CCCD>
Set command enables or disables the notifications and indications for the
characteristic feature.
Parameters:
Name
Type
Default
Description
<Connection
Handle>
hex
N/A
It specifies the connection handle
returned during BLE connect
command.
Value:
0x1÷0xFFFF
:
The supported parameter value
range.
<Characteristic
Handle>
hex
N/A
It specifies the characteristic
handle returned during service
discovery.
Value:
0x1÷0xFFFF
:
The supported parameter value
range.
<CCCD>
integer
N/A
It specifies the state of the Client
Characteristic Configuration
Descriptor. The supported
parameter values range is 0-2.
Values:
0
:
Disables CCCD

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English