Telit Wireless Solutions LE910C series - AT$LOCMODE - GPS Location Request Mode

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1718 of 1904 2022-03-04
Not Subject to NDA
3.28.2.6. AT$LOCMODE - GPS Location Request Mode
This command configures to enable GPS Location Request mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT$LOCMODE=<mode>
This command executes the Location request for autonomous GPS.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
location request mode
Values:
0
:
Terminate autonomous GPS session
1
:
Activate autonomous GPS session
AT$LOCMODE=?
Test command returns the current value of the location mode <mode>.
$LOCMODE: <mode>
This command is only applicable for Sprint version.