Telit Wireless Solutions LE910C series - AT#EMRGD - Dial an Emergency Call

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1065 of 1904 2022-03-04
Not Subject to NDA
3.13.3. AT#EMRGD - Dial an Emergency Call
This command dials an emergency call.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#EMRGD[=<par>]
Execution command initiates an emergency call without specifying the
emergency service.
Set command initiates an emergency call specifying the emergency
service.
When the emergency call can initiate, an unsolicited result code reports
the selected emergency services in the following format:
#EMRGD: <serv>[,<serv>..[,<serv]]
Parameter:
Name
Type
Default
Description
<par>
integer
0
eCall service (if eCall is supported, Rel8
feature) or sum of integers representing the
required emergency services:
15. 1 = Police
16. 2 = Ambulance
17. 4 = Fire Brigade
18. 8 = Marine Guard
19. 16 = Mountain Rescue
Values:
0
:
unspecified
1÷31
:
mask of emergency services
32
:
manually initiated eCall
64
:
automatically initiated eCall