Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 714 of 1904 2022-03-04
Not Subject to NDA
WLAN
3.8.1. AT#WLANSTART - Enable/disable WLAN
This command is used to enable/disable WLAN.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANSTART=<mode>[,<cid>[,<ip_family>]]
Set command is used to enable/disable WLAN.
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
Status mode
Values:
0
:
Disable
1
:
Enable
2
:
Auto enable with start
<cid>
integer
N/A
(PDP Context Identifier) numeric
parameter which specifies a particular
PDP context definition (see +CGDCONT
command).
Value:
1÷max
:
The value of max is returned by the Test
command.
<ip_family>
integer
N/A
IP family
Values:
4
:
ipv4

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English