Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 741 of 1904 2022-03-04
Not Subject to NDA
3.8.18. AT#WLANICMP - WLANICMP Ping Support
This command enables/disables the ICMP Ping support on WLAN interface.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANICMP=<mode>
Set Command enables/disables the ICMP Ping support on WLAN
interface.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
ICMP Ping Support Mode
Values:
0
:
Disable ICMP Ping support
1
:
Reserved
2
:
Enable free ICMP ping support; the module is sending
a proper ECHO_REPLY to every IP address pinging it.
AT#WLANICMP?
Read command returns whether the ICMP Ping support is currently
enabled or not, in the format:
#WLANICMP: <mode>
AT#WLANICMP=?
Test command reports the supported range of values for the <mode>
parameter.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English