Telit Wireless Solutions LE910C series - Page 740

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 740 of 1904 2022-03-04
Not Subject to NDA
AT#WLANBD?
Read command returns status of the currently added wlan board data
firmware file or otp file.
#WLANBD : <index>,<size>
#WLANBD : <index>,<size>
Parameter:
<index> The parameter indicate the kind of bin file.
0: bdwlan.bin (wlan board data firmware)
1: otp.bin (otp)
<size> 0 means there are no added wlan board data firmware file. (default)
If the size lager than 0, it means there are added firmware file.
AT#WLANBD=?
Test command returns OK result code.