Telit Wireless Solutions LE910C series - AT#JDRGNSS - GNSS Jamming Detect & Report

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 361 of 1904 2022-03-04
Not Subject to NDA
3.3.2. AT#JDRGNSS - GNSS Jamming Detect & Report
This command configures to support GNSS Jamming Detect & Report.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#JDRGNSS=<mode>
Set command allows to control the GNSS Jamming Detect & Report
feature.
The MODULE can detect if a GNSS Jammer is active in its range and give
indication to the user of this condition on the serial line with an unsolicited
code, in the format:
#JDRGNSS: <status>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
behavior mode of the Jammed Detect &
Report
Values:
0
:
disables Jammed Detect & Report
1
:
enables the Jammed Detect
Unsolicited field:
Name
Type
Description
<status>
string
Jammed condition
Values:
JAMMING SUSPICION
:
Suspicion of GNSS
jamming