Telit Wireless Solutions LE910C series - AT#CMGS - Send Short Message

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 666 of 1904 2022-03-04
Not Subject to NDA
3.6.22. AT#CMGS - Send Short Message
This command sends a short message.
3GPP TS 27.005
3GPP TS 23.040
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#CMGS=<param1>,<param2>
Execution command sends a short message to the network. <param1> and
<param2> assume different meanings according to the used SMS format.
If message is successfully sent, then the result is shown with the following
URC:
#CMGS: <mr>
<mr> parameter is described in Unsolicited fields section.
Parameters:
Name
Type
Default
Description
<param1>
mixed
-
The meaning of this parameter depends on
the SMS format (PDU or Text mode)
selected by +CMGF.
<param2>
mixed
-
The meaning of this parameter depends on
the SMS format (PDU or Text mode)
selected by +CMGF.
Additional info:
In case of PDU mode the parameters meaning is the following: