Telit Wireless Solutions LE910C series - AT#SDOMAIN - Supplementary Service Domain Preference

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 509 of 1904 2022-03-04
Not Subject to NDA
3.4.48. AT#SDOMAIN - Supplementary service domain preference
This command allows to selects service domain preference.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SDOMAIN=[<Sdomain>],[<USdomain>]
Set command allows to selects service domain preference.
Parameters:
Name
Type
Default
Description
<Sdomain>
integer
3
supplementary service domain
preference
Values:
0
:
Domain preference is auto
1
:
Domain preference is CS only
2
:
Domain preference is PS only
3
:
Domain preference is PS preferred
<USdomain>
integer
N/A
Unstructured supplementary service
domain preference
Values:
0
:
Domain preference is CS only
1
:
Domain preference is IMS preferred
Need to power cycle the unit for the setting to take effect.
the mode is saved into the NVM