Telit Wireless Solutions LE910C series - AT+CESQ - Extended Signal Quality

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 459 of 1904 2022-03-04
Not Subject to NDA
3.4.32. AT+CESQ - Extended Signal Quality
Execution command returns received signal quality parameters according to the
network on which the module is registered.
[1] 3GPP TS 27.007
[2] 3GPP TS 45.008
[3] 3GPP TS 25.133
[4] 3GPP TS 36.133
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CESQ
See Additional info section for networks on which the module can be
registered.
Additional info:
The execution command returns the following message. Its format
depends on the network on which the module is registered.
2G Networks
+CESQ: <rxlev>,<ber>,255,255,255,255
3G Networks
+CESQ: 99,99,<rscp>,<ecno>,255,255
LTE Networks