Telit Wireless Solutions LE910C series - AT$GPSSAV - Save GNSS Parameters Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1715 of 1904 2022-03-04
Not Subject to NDA
3.28.2.4. AT$GPSSAV - Save GNSS Parameters Configuration
This command stores the current GNSS parameters in the NVM of the device.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT$GPSSAV
Execution command stores the current GNSS parameters in the NVM of
the device.
AT$GPSSAV=?
Test command returns the OK result code.
The saved parameters are those of:
$GPSP, $GPSR, $GPSNMUN, $GPSNMUNEX, $GPSQOS, $GPSSLSR,
$GPSSTOP and $GPSAT commands.
AT$GPSSAV
OK