Telit Wireless Solutions LE910C series - Mqtt; AT#MQEN - Enable MQTT Feature

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1774 of 1904 2022-03-04
Not Subject to NDA
MQTT
3.32.1. AT#MQEN - Enable MQTT Feature
This command initializes a MQTT client and allocates the necessary resources.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQEN=<instance_number>,<enable>
Set command enables/disables the MQTT client for further configuration
and usage
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance to
activate or deactivate.
Value:
1÷maxClients
:
client instance range. to know
maxClients value use test
command
<enable>
integer
0
Selects if client must be
activated or deactivated
Values:
0
:
disable
1
:
enable
AT#MQEN?