Telit Wireless Solutions LE910C series - AT#SKIPESC - Skip Escape Sequence

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 311 of 1904 2022-03-04
Not Subject to NDA
3.2.4.16. AT#SKIPESC - Skip Escape Sequence
This command enables/disables skipping the escape sequence.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#SKIPESC=[<mode>]
Set command enables/disables skipping the escape sequence (+++) while
transmitting during a data connection.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable/disable skipping the escape
sequence (+++)
Values:
0
:
does not skip the escape sequence; its transmission is
enabled.
1
:
skips the escape sequence; its transmission is not
enabled.
In FTP connection the escape sequence is not transmitted,
regardless of the command setting.
AT#SKIPESC?
Read command returns the current value of the parameter <mode> in the
format:
#SKIPESC: <mode>