Telit Wireless Solutions LE910C series - AT#CFF - Call Forwarding Flags

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 82 of 1904 2022-03-04
Not Subject to NDA
3.1.8. AT#CFF - Call Forwarding Flags
The command configures the format of call forwarding URC
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#CFF=<enable>
Set command enables/disables the presentation of the call forwarding
flags URC
Parameter:
Name
Type
Default
Description
<enable>
integer
0
enable/disable the
presentation of the #CFF URC
The URC format is:
#CFF:
<enable>,<status>,<fwdtonum>
Values:
0
:
disable the presentation of the #CFF URC
1
:
enable the presentation of the #CFF URC. The #CFF
URC is shown each time the Call Forwarding
Unconditional (CFU) SS setting is changed or
checked. It is also shown on each startup, and it
reports the status of the call forwarding flags, as
they are currently stored on SIM
Unsolicited fields:
Name
Type
Description
<staus>
integer
Reports if CFU is enabled or disabled
Values: