Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 537 of 1904 2022-03-04
Not Subject to NDA
3.4.59. AT#REJER - Network Reject Error Report
The command is related to a numeric error report that comes from the network.
It is described the meaning of the <reject_cause> numeric value that comes
from MM, GMM, and EMM.
•
3GPP TS 24.008 Annex G.
3GPP TS 24.301 Annex A.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#REJER=<mode>
Set command controls the presentation of an unsolicited result code
#REJER: <reject_cause>,<AcT>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enables/disables the network reject
unsolicited result code.
Values:
0
:
disable the network reject unsolicited result code
1
:
enable the network reject unsolicited result code
Unsolicited fields:
Name
Type
Description

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English