Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 505 of 1904 2022-03-04
Not Subject to NDA
3.4.46. AT#MANAGEROAM - Managed Roam feature
This command sets the Managed Roam feature.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#MANAGEROAM=<mgrf>,<auto_reject>
Set command enables/disables specific features.
Parameters:
Name
Type
Default
Description
<mgrf>
integer
0
Managed Roaming Feature
Values:
0
:
Disable Manage Roam
1
:
Enable Manage Roam
<auto_reject>
string
0
With 4 rejects on LU registration,
move to Automatic network selection
Values:
0
:
Disable automatic network selection
1
:
Enable automatic network selection
After setting this command, need to reset using #REBOOT or HW
reset
The <mgrf> default value for the following operators is '1'.
- LE910Cx-AP KDDI/TELSTRA/VNZ
- LE910Cx-EU
- LE910Cx-NF VZW
- LE910C1-SV

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English