Telit Wireless Solutions LE910C series - AT#BINDICATE - BLE Indication

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1892 of 1904 2022-03-04
Not Subject to NDA
3.36.2. AT#BINDICATE - BLE Indication
This command is used for BLE Indication.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BINDICATE=<Connection Handle>,<Characteristic Handle>,<Hex
Data>
Set command is used for BLE Indication.
Parameters:
Name
Type
Default
Description
<Connection
Handle>
integer
-
It specifies the connection handle
on which INDICATE operation
performed.
<Characteristic
Handle>
integer
N/A
It specifies the Characteristic
handle returned using service
discovery command (AT#BSRVD).
Value:
0x1÷0xFFFF
:
The supported parameter value
range.
<Hex Data>
string
-
It specifies ASCII coded byte
stream as hexadecimal values.
#BINDICATE: 5,15,1234567891