Telit Wireless Solutions LE910C series - AT#WLANMODULE - WLAN Module Type

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 752 of 1904 2022-03-04
Not Subject to NDA
3.8.24. AT#WLANMODULE - WLAN Module Type
This command is used to define the WLAN Module Type.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#WLANMODULE[=[<module_id>]]
Set command allows to define WLAN module type to be used.
It will select the appropriate WLAN board file to be downloaded to the
module.
Parameter:
Name
Type
Default
Description
<module_id>
integer
0
Module Identification Number
Values:
0
:
Module Type WE866C3
1
:
Module Type WE866C6
Additional info:
Default selected module type is WE866C3
This command is applicable after starting WE866Cx Connection
Manager application. This command should be run after
configuring AT#ISEL=1.
This command should be run before running AT#WLANSTART
command.