Telit Wireless Solutions LE910C series - AT#FTPCWD - FTP Change Working Directory

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1362 of 1904 2022-03-04
Not Subject to NDA
3.18.4. AT#FTPCWD - FTP Change Working Directory
Command to change the working directory on FTP server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPCWD=[<dirname>]
Execution command, issued during an FTP connection, changes the
working directory on FTP server.
Parameter:
Name
Type
Default
Description
<dirname>
string
-
Name of the new working directory.
The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
AT#FTPCWD=?
Test command returns the OK result code.