Telit Wireless Solutions LE910C series - Gnss; GNSS Configuration; AT$LCSSLP - Update SLP Address

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1657 of 1904 2022-03-04
Not Subject to NDA
GNSS
3.28.1. GNSS Configuration
3.28.1.1. AT$LCSSLP - Update SLP Address
Update the SLP address.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LCSSLP=<slpAddressType>[,<slpAddress>[,<slpPortNumber>]]
Set command allows to update the SLP address and SLP port number.
Parameters:
Name
Type
Default
Description
<slpAddressType>
integer
1
SLP address type
Values:
0
:
IPv4
1
:
FQDN
2
:
Delete SLP address
3
:
IPv6
<slpAddress>
string
-
SLP address in FQDN, IPv4 or
IPv6 format
<slpPortNumber>
integer
-
SLP port number. Default value
is 0.
If <slpAddressType> is 0, 1 or 3, then <slpAddress> is a mandatory
parameter.