Telit Wireless Solutions LE910C series - AT+CGACT - PDP Context Activate or Deactivate

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 848 of 1904 2022-03-04
Not Subject to NDA
3.9.30. AT+CGACT - PDP Context Activate or Deactivate
This command activates or deactivates the specified PDP context(s).
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CGACT=[<state>[,<cid>[,<cid>][,...]]]]
Parameters:
Name
Type
Default
Description
<state>
integer
N/A
activate/deactivate the PDP context
Values:
0
:
deactivate
1
:
activate
<cid>
integer
-
specifies a PDP context definition (see
+CGDCONT command)
if no <cid>s are specified, the activation form of the command
activates the first three defined contexts. The deactivation form
deactivates all the active contexts.
AT+CGACT?
Read command returns the current activation state for all the defined PDP
contexts in the format: