Telit Wireless Solutions LE910C series - AT$LCSLPP - Set Configuration Information for LPP Protocol

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1695 of 1904 2022-03-04
Not Subject to NDA
3.28.1.17. AT$LCSLPP - Set Configuration Information for LPP Protocol
This command sets the configuration information for LPP Protocol.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LCSLPP=<mode>
Set command sets the configuration information for LPP (LTE Poisoning
Protocol).
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
configuration for LPP
Values:
0
:
RRLP in LTE
1
:
LPP user plane in LTE
2
:
LPP control plane in LTE
3
:
LPP UP/CP in LTE