Telit Wireless Solutions LE910C series - AT$GPSDTM - NMEA Datum Control Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1705 of 1904 2022-03-04
Not Subject to NDA
3.28.1.21. AT$GPSDTM - NMEA Datum Control Configuration
This command set the NMEA datum control configuration.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSDTM=<datum>
Set command to configure the NMEA datum control.
Parameter:
Name
Type
Default
Description
<datum>
integer
0
NMEA datum
Values:
0
:
enable WGS84
1
:
enable PZ90
AT$GPSDTM?
Read command returns the NMEA datum control configuration, in the
format:
$GPSDTM: <datum>
AT$GPSDTM=?
Test command returns the supported range of values for parameter
<datum>