Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1385 of 1904 2022-03-04
Not Subject to NDA
3.18.18. AT#FTPCFG - FTP Configuration
This command sets the time-out used when opening either the FTP control channel or
the FTP traffic channel.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPCFG=<tout>,<IPPignoring>[,<FTPSEn>[,<FTPext>]]
Sets the time-out used when opening either the FTP control channel or
the FTP traffic channel.
Parameters:
Name
Type
Default
Description
<tout>
integer
100
time out in
100
milliseconds
units
Value:
100÷5000
:
hundreds of ms
<IPPignoring>
integer
N/A
enable or
disable IP
private
ignoring
Values:
0
:
No IP Private ignoring. During a FTP passive
mode connection client uses the IP address
received from server, even if it is a private IPV4
address.
1
:
IP Private ignoring enabled. During a FTP
passive mode connection if the server sends a

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English