Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1225 of 1904 2022-03-04
Not Subject to NDA
3.17.5. AT#CGPADDR - Show PDP Address
This command returns a list of PDP addresses for the specified context identifiers.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#CGPADDR=[<cid>[,<cid>[,…]]]
Execution command returns a list of PDP addresses for the specified
context identifiers in the format:
#CGPADDR: <cid>,<PDP_addr>[<CR><LF>#CGPADDR:
<cid>,<PDP_addr>[...]]
Parameter:
Name
Type
Default
Description
<cid>
integer
N/A
specifies a particular PDP context definition
(see +CGDCONT command). If no <cid>
specified, the addresses for all defined
contexts are returned.
Value:
1÷max
:
the value of max is returned by the Test command
Additional info:
parameter meaning,
Name
Type
Default
Description

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English