Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1432 of 1904 2022-03-04
Not Subject to NDA
3.21.3. AT#SSLEN - Enable a SSL Socket
This command activates/deactivates a socket secured by SSL.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLEN=<SSId>,<Enable>
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
only one socket is available
<Enable>
integer
0
activate/deactivate secure socket
Values:
0
:
deactivate
1
:
activate
If the unique available secure socket is not activated, all the
commands - belonging to the SSL set (example: #SSLSECDATA,
#SSL..., etc.) and different from test commands - return an error
message. #SSLS command is an exception, it can be issued also if
the socket is deactivated.
If the unique available secure socket is connected, it cannot be
deactivated issuing AT#SSLEN=1,0.
AT#SSLEN?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English