Telit Wireless Solutions LE910C series - AT#MQSCFG - Configure MQTT SSL Certs and Key

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1792 of 1904 2022-03-04
Not Subject to NDA
3.32.9. AT#MQSCFG - Configure MQTT SSL certs and key
Configure MQTT SSL certs and key
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSCFG=<instance_number>,<cert_type>,<set>[,<size>]
Set command to set SSL certs
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClient
:
client instance range. To know
maxClients value use test
command
<cert_type>
integer
N/A
Select cert type
Values:
0
:
CA cert
1
:
Client cert
2
:
Client key
<set>
integer
N/A
Unset/set selected <cert_type>
Values:
0
:
Unset selected <cert_type>