Telit Wireless Solutions LE910C series - AT+COLR - Connected Line Identification Restriction Status

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 521 of 1904 2022-03-04
Not Subject to NDA
3.4.53. AT+COLR - Connected Line Identification Restriction status
This command refers to the GSM/UMTS supplementary service COLR (Connected Line
Identification Restriction) that enables a called subscriber to restrict the possibility of
presentation of connected line identity (COL) to the calling party after receiving a mobile
terminated call
3GPP TS 22.081
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+COLR
The command displays the status of the COL presentation in the
network. It has no effect on the execution of the supplementary service
COLR in the network.
Execution command triggers an interrogation of the activation status of
the COLR service according to standard. The command returns the COLR
service status in the format:
+COLR: <m>
The <m> parameter is described in Additional info section.
Additional info:
Here is the meaning of the <m> parameter returned by the
command.
Name
Type
Default
Description
<m>
integer
0
subscriber COLR service status.