Telit Wireless Solutions LE910C series - AT+CMGF - Message Format

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 597 of 1904 2022-03-04
Not Subject to NDA
3.6.3. AT+CMGF - Message Format
Selects the format of SMS messages to be used in following SMS commands.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CMGF=[<mode>]
Set command selects the format of SMS messages used with send, list,
read and write commands.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
format to use for SMS operations
Values:
0
:
PDU mode
1
:
text mode
AT+CMGF?
Read command reports the current value of the parameter <mode> in the
format:
+CMGF: <mode>
AT+CMGF=?
Test command returns the supported values of parameter <mode>.