Telit Wireless Solutions LE910C series - AT$LOCATION - Enable Location Service

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1724 of 1904 2022-03-04
Not Subject to NDA
3.28.3.3. AT$LOCATION - Enable Location Service
This command configures to enable Location Service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LOCATION=<n>
This command enables/disables the Location Services inside the module.
Parameter:
Name
Type
Default
Description
<n>
integer
1
mode
Values:
0
:
Disable Location Services
1
:
Enable Location Services
AT$LOCATION=?
Reports the current value of the <n> parameter, in the format:
$LOCATION: <n>
This command is only applicable for Sprint version.