Telit Wireless Solutions LE910C series - AT#TCPMAXDAT - Maximum TCP Payload Size

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1350 of 1904 2022-03-04
Not Subject to NDA
3.17.54. AT#TCPMAXDAT - Maximum TCP Payload Size
This command sets the maximum TCP Payload Size.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#TCPMAXDAT=<size>
Set command allows setting the maximum TCP payload size in TCP
header options.
Parameter:
Name
Type
Default
Description
<size>
integer
0
Maximum TCP payload size accepted in one
single TCP/IP datagram.
It is sent in TCP header options in SYN
packet.
Values:
0
:
the maximum TCP payload size is automatically
handled by module
496÷1420
:
maximum TCP payload size
AT#TCPMAXDAT?
Read command reports the current maximum TCP payload size, in the
format.
#TCPMAXDAT:<size>
AT#TCPMAXDAT=?