Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1290 of 1904 2022-03-04
Not Subject to NDA
3.17.30. AT#SGACTAUTH - PDP Context Authentication Type
This command sets the authentication type for IP Easy
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SGACTAUTH=<type>
Set command sets the authentication type for IP Easy.
This command has effect on the authentication mode used on
AT#SGACT or AT#GPRS commands.
Parameter:
Name
Type
Default
Description
<type>
integer
1
authentication type for IP Easy
Values:
0
:
no authentication
1
:
PAP authentication
2
:
CHAP authentication
the parameter is not saved in NVM.
as per the Telstra requirement, the default value for the Telstra is
"0 - no authentication".
AT#SGACTAUTH?
Read command reports the current IP Easy authentication type, in the
format:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English