Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1228 of 1904 2022-03-04
Not Subject to NDA
3.17.6. AT#SCFG - Socket Configuration
The command sets the configuration for the socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SCFG=<connId>,<cid>,<pktSz>,<maxTo>,<connTo>,<txTo>
Set command sets the socket configuration parameters.
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier
Value:
1÷conMax
:
supported range (conMax value is returned
by test command)
<cid>
integer
N/A
PDP context identifier
numeric parameter which specifies a
particular PDP context definition
The value of max is returned by the Test
command.
Value:
1÷max
:
specifies a particular PDP context definition
<pktSz>
integer
300
packet size to be used by the TCP/UDP/IP
stack for data sending. Used for online
data mode only
Values:
0
:
automatically chosen by the device
1÷1500
:
packet size in bytes

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English