Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1891 of 1904 2022-03-04
Not Subject to NDA
Bluetooth Low Energy ASYNC AT Response
3.36.1. AT#BNOTIFY - BLE Notify
This command is used for BLE notifications.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BNOTIFY=<Connection Handle >,<Characteristic Handle>,<Hex Data>
Set command is used for BLE notifications.
Parameters:
Name
Type
Default
Description
<Characteristic
Handle>
hex
-
It specifies the Characteristic
handle returned using service
discovery command (AT#BSRVD).
The supported parameter value
range is "0x1-0xFFFF".
<Hex Data>
hex
-
It specifies ASCII coded byte
stream as hexadecimal values.
#BNOTIFY: 5,15,1234567891

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English