Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 840 of 1904 2022-03-04
Not Subject to NDA
3.9.27. AT+CGEQOSRDP - EPS Quality of Service Read Dynamic Parameters
The command returns the parameters related to the Quality of Service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CGEQOSRDP=[<cid>]
The execution command returns the Quality of Service parameters <QCI>,
[<DL_GBR> and <UL_GBR>] and
[<DL_MBR> and <UL_MBR>] of the active secondary or non secondary PDP
context associated to the provided context identifier <cid>.
If the parameter <cid> is omitted, the Quality of Service parameters for all
secondary or non secondary active PDP contexts are returned.
Parameter:
Name
Type
Default
Description
<cid>
integer
-
it specifies a particular Traffic Flows
definition in EPS and a PDN connection
definition in UMTS/GPRS.
Additional info:
Possible Response(s):
+CGEQOSRDP:<cid>,<QCI>,[<DL_GBR>,<UL_GBR>],[<DL_MBR>,<UL_MBR>][<C
R>>LF>
+CGEQOSRDP:<cid>,<QCI>,[<DL_GBR>,<UL_GBR>],[<DL_MBR>,<UL_MBR>][...]]
Defined values:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English