Telit Wireless Solutions LE910C series - Page 841

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 841 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<QCI>
integer
-
specifies a class of EPS QoS. (see 3GPP TS
23.203 [85])0 QCI is selected by network [1..4]
value range for guaranteed bit rate Traffic
Flows [5..9] value range for non-guaranteed
bit rate Traffic Flows.
<DL_GBR>
integer
-
indicates DL GBR in case of GBR QCI. The
value is in kbit/s. This parameter is omitted
for a non-GBR QCI. (see 3GPP TS 24.301 [83])
<UL_GBR>
integer
-
indicates UL GBR in case of GBR QCI. The
value is in kbit/s. This parameter omitted for
a non-GBR QCI. (see 3GPP TS 24.301 [83])
<DL_MBR>
integer
-
indicates DL MBR in case of GBR QCI. The
value is in kbit/s. This parameter omitted for
a non-GBR QCI. (see 3GPP TS 24.301 [83])
<UL_MBR>
integer
-
indicates UL MBR in case of GBR QCI. The
value is in kbit/s. This parameter omitted for
a non-GBR QCI. (see 3GPP TS 24.301 [83])
AT+CGEQOSRDP=?
+CGEQOSRDP: (list of <cid>s associated with secondary or non secondary active
contexts)
Parameters of both network and MT/TA initiated PDP contexts returned.