Telit Wireless Solutions LE910C series - AT+CLAC - Available at Commands

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 172 of 1904 2022-03-04
Not Subject to NDA
3.2.2.39. AT+CLAC - Available AT Commands
This command shows the available AT commands list.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CLAC
The execution command causes the ME to return one or more lines
reporting the AT commands that are available to the user. The format is:
<ATcmd1>[<CR><LF><ATcmd2>[...]]
<ATcmdn> is the AT command.
AT+CLAC will show for all supported AT commands regardless of
carrier network configuration. Particular AT command needs to
activate an appropriate carrier network configuration by using
#FWSWITCH.
AT+CLAC=?
Test command returns the OK result code.