Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 758 of 1904 2022-03-04
Not Subject to NDA
3.8.27. AT#CONNMGRSTART - Start/stop WE866C3 Connection Manager
This command is used to start/stop the WE866C3 Connection Manager application.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CONNMGRSTART=<operation>,<host_port_id>
Set command is used to start/stop WE866C3 Connection Manager
application.
Parameters:
Name
Type
Default
Description
<operation>
integer
N/A
Operating State
Values:
0
:
Stop Connection Manager
1
:
Start Connection Manager
<host_port_id>
integer
N/A
Host port ID
Values:
0
:
USB0 or USIF0
1
:
USB1 or USIF0
2
:
Reserved
3
:
Reserved
NOTE: To use main uart(USIF0), AT#M2MATP must be configured
as 1 (enable) before starting connection manager.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English