Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 771 of 1904 2022-03-04
Not Subject to NDA
3.9.2. AT#DUALAPN - Double PDP Context on Same APN
Set command enables/disables the same APN multiple PDN feature.
The network operator can reply with reject to the PDN Connectivity Request on an APN
already in use with:
Cause #55 - Multiple PDN connections for a given APN not allowed
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#DUALAPN=[<mode>]
Parameter:
Name
Type
Default
Description
<mode>
integer
0
mode
Values:
0
:
Disable the same APN multiple PDN feature
1
:
Enable the same APN multiple PDN feature
These values are saved in the non-volatile memory.
#DUALAPN does not affect the standard +CGACT.
Manual reboot is required after changing.
AT#DUALAPN?
Read command reports the current setting for <mode>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English