Telit Wireless Solutions LE910C series - AT#M2 MREADEXT - M2 M Read File Extended

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1653 of 1904 2022-03-04
Not Subject to NDA
3.27.13. AT#M2MREADEXT - M2M Read File Extended
This command reports the content of a file stored in the File System.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#M2MREADEXT=<file_name>[,<maxByte>[,<viewMode>[,<chunkPrint>]]]
Execution command reads the content of a generic file stored in the folder
specified by <file_name> parameter. After command line is terminated
with <CR>, the module prompts the following five-character sequence:
<CR><LF><less_than><less_than><less_than> (see IRA 13, 10, 60, 60, 60)
followed by the file content.
Parameters:
Name
Type
Default
Description
<file_name>
string
-
can be:
- full file name path starting with
"/"
- relative file name path
- file name (in current directory)
<maxByte>
integer
0
maximum number of bytes to read
Value:
0÷4096
:
maximum number of bytes to read
<viewMode>
integer
N/A
enable/disable verbose mode
Values:
0
:
text format
1
:
hexadecimal format