LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1654 of 1904 2022-03-04
print whole file content at once or one
<maxByte> and exit
print one < maxByte > and wait for <CR> char to
continue
<maxByte>=0 and <chunkPrint>=1 combination is not allowed.
Maximum full path length is 128 chars, maximum folder or file
name is 64 chars. Overall max full file path is 128 + 64 = 192 chars.
If the file <file_name> or its path is not present in the file system,
an error code is reported.
<file_name> and its path are case sensitive.
<file_name> can be equivalently enclosed on quote or not.
When printing the file content in <maxByte> chunks, omit the
<file_name> on all subsequent AT command executions. Check
code examples for further details.
AT#M2MREADEXT=?
Test command returns OK result code.
To Next Page
Loading...
