Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1655 of 1904 2022-03-04
Not Subject to NDA
AT#M2MREADEXT="/xxfolder/config/config.txt"
<<< here receives the prompt and then the file content is displayed
immediately after the prompt
OK
AT#M2MCHDIR="/xxfolder"
OK
AT#M2MREADEXT=config/config.txt
<<< here receives the prompt and then the file content is displayed
immediately after the prompt
OK
Single chunk print mode:
AT#M2MREADEXT=config/config.txt,1000
<<< here receives the prompt; then the first 1000 bytes after the prompt
OK
AT#M2MREADEXT=,1000
<<< here receives the prompt and the subsequent 1000 bytes after the
prompt.
OK
AT#M2MREADEXT=,1000 continue until the end of the file
<<< here receives the prompt and the subsequent 1000 bytes after the
prompt.
OK
Continuous chunk print mode:
AT#M2MREADEXT=config/config.txt,1000,0,1
<<< here receives the prompt (only once) and the subsequent 1000 bytes
after the prompt.
The <CR> char triggers the next print of 1000 bytes.
The OK is printed once the whole file content has been printed.
OK

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English