Telit Wireless Solutions LE910C series - AT#ENAEVMONICFG - Set Evmoni Service Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1550 of 1904 2022-03-04
Not Subject to NDA
3.24.2. AT#ENAEVMONICFG - Set EvMoni Service Parameters
This command configures the EvMoni service parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ENAEVMONICFG=<instance>[,<URCMod>[,<timeout>]]
Parameters:
Name
Type
Default
Description
<instance>
integer
3
AT instance that will be used by the
service to run the AT command
Value:
1÷3
:
AT instance
<URCMod>
integer
1
enable or disable unsolicited message.
The URC format is:
#EVMONI: <Text>
Values:
0
:
disable unsolicited message
1
:
enable an unsolicited message when an AT
command is executed after an event is occurred
<timeout>
integer
5
it defines the maximum time for a
command execution. If timeout expires
the module will be rebooted
Value:
1÷60
:
minutes
Unsolicited field: