Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 913 of 1904 2022-03-04
Not Subject to NDA
3.10.26. AT#ESIMCAP - Sets or gets the terminal capability
This command allows the client to set the contents of the TERMINAL CAPABILITY
command that is sent to the card as part of card initialization procedure.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT#ESIMCAP=<slot>[,<tag>,<value>,<remove_tlv>]
Set command allows the client to set the contents of the TERMINAL
CAPABILITY command that is sent to the card as part of card initialization
procedure. The configuration set by this command is applicable only from
the next card initialization.
Parameters:
Name
Type
Default
Description
<slot>
integer
N/A
Slot information
Values:
1
:
Slot 1
2
:
Slot 2
<tag>
integer
N/A
Terminal capability tag, according to
ETSI TS 102.221. The service allows
the client to update only certain tags
including
Values:
82
:
additional interface support
83
:
eUICC-related capabilities
<value>
integer
-
Value of the terminal capability.
<remove_tlv>
integer
N/A
Indicates whether this TLV should be
removed from the terminal capability

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English