Telit Wireless Solutions LE910C series - Page 914

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 914 of 1904 2022-03-04
Not Subject to NDA
that is sent to the card. When this is
set to TRUE, the value field is ignored.
Values:
0
:
not remove the terminal capability
1
:
remove the terminal capability, the value field is
ignored
Additional info:
In case <tag> is '82':
Name
Type
Default
Description
<value>
integer
N/A
Value of the terminal capability.
Values:
0
:
UICC-CLF interface according to ETSI TS
102.613 not supported
1
:
UICC-CLF interface according to ETSI TS
102.613 supported
In case <tag> is '83':
Name
Type
Default
Description
<value>
integer
N/A
unsigned Integer used as a bit field,
according to GSMA SGP.22
0 … 255 - used as a bit field:
bit1:
0 - Local User Interface in the Device
(LUId) not supported
1 - Local User Interface in the Device
(LUId) supported