Telit Wireless Solutions LE910C series - Page 915

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 915 of 1904 2022-03-04
Not Subject to NDA
bit2:
0 - Local Profile Download in the
Device (LPDd) not supported
1 - Local Profile Download in the
Device (LPDd) supported
bit3:
0 - Local Discovery Service in the
Device (LDSd) not supported
1 - Local Discovery Service in the
Device (LDSd) supported
bit4:
0 - LUIe based on SCWS not
supported
1 - LUIe based on SCWS supported
bit5 to 8: reserved for future.
Value:
0÷255
:
eUICC-related capabilities
If there is only <slot> parameter in set command, this command
returns Terminal Capability set in card as follows:
Response:
#ESIMCAP: <terminal_cap_len>,< tag >,<value>,<tag>,<value> ……
Name
Type
Default
Description
<terminal_cap_len>
integer
-
number of sets of <tag>
and <value>
<tag>
integer
N/A
Terminal capability tag,
according to ETSI TS
102.221. The service
allows the client to