Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1812 of 1904 2022-03-04
Not Subject to NDA
3.32.16. AT#MQPUPP - Set PUBLISH Packet Property for MQTT Transmission
Set PUBLISH Packet Property for MQTT Transmission
MQTT Version 5.0
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQPUPP=<instance_number>,<identifier>,<value>[,<user_property_name>[,<
user_property_value>]]
Set command sets the PUBLISH packet property for the selected MQTT client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
-
Selects the client instance.
The list of available clients
is obtained with
AT#MQEN? or the read
command.
<identifier>
integer
N/A
Property identifier.
Values:
1
:
0x01, Payload Format Indicator.
<value> mapping to this identifier
should be an integer
2
:
0x02, Message Expiry Interval.
<value> mapping to this identifier
should be an integer
3
:
0x03, Content Type. <value> mapping
to this identifier should be a string

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English