Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 95 of 1904 2022-03-04
Not Subject to NDA
3.1.15. AT+CSNS - Single Numbering Scheme
This command selects the bearer used when the mobile terminated single numbering
scheme call is established.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CSNS=[<mode>]
Set command selects the bearer used when the mobile terminated single
numbering scheme call is established. Parameter values set with
+CBST command used when <mode> equals to a data service.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Values:
0
:
voice (factory default)
2
:
fax (TS 62)/9 (not supported by LTE)
4
:
data
if +CBST parameter is set to a value that is not applicable to single
numbering calls, ME/TA shall map the value to the closest valid
one. E.g. if user has set <speed>=71, <name>=0 and <ce>=1 (non-
trasparent asynchronous 9600 bps V.110 ISDN connection) for
mobile originated calls, ME/TA shall map the values into non-
transparent asynchronous 9600 bps V.32 modem connection when
single numbering scheme call is answered.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English