Telit Wireless Solutions LE910C series - AT#BADVE - BLE Advertise Enable

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1844 of 1904 2022-03-04
Not Subject to NDA
3.35.8. AT#BADVE - BLE Advertise Enable
This command is used to control the advertising behavior.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BADVE=<Advertising>
Set command is used to control the advertising behavior
Parameter:
Name
Type
Default
Description
<Advertising>
integer
N/A
It specifies the behavior of
advertising. The supported parameter
value range is 0-3.
Values:
0
:
Advertising is ON with Customized advertising
DISABLED
1
:
Advertising is ON with Customized advertising
being ENABLED
2
:
Reserved
3
:
Advertising is OFF
AT#BADVE?
Read command returns the current status in the format:
#BADVE: <ADVERTISING>
For example:
at#badve?